The PENTREAT penetrating concrete sealers family has expanded with the addition of PENTREAT 244-40 W/B with 40% silane content and PENTREAT 244-20 W/B with 20% silane content....
X-FOAM is a flexible, closed cell, polypropylene joint solution. The multi-use product can serve as an expansion, contraction or isolation joint solution for concrete projects...
HYDRALASTIC 836 SL is a single-component, cold-applied, solvent-free, water-activated, waterproofing system. HYDRALASTIC 836 SL cures to form a tough, flexible waterproofing membrane...
MEADOW-PATCH SMOOTH-GRADE is a one-component, polymer-modified, concrete surface finisher designed to achieve an ultra-smooth finish on precast, cast-in-place, tilt-up and other...
PENTREAT 244-40 is a water-repellant penetrating sealer with 40% active content silane to keep unwanted water and salt from penetrating concrete and masonry structures. The breathable...
AIR-SHIELD TMP is a water-based air and liquid barrier that cures to form a thin, tough elastomeric membrane. It can be applied to most common surfaces and integrated into various...
CLAY-TITE is a dual-layer waterproofing membrane comprised of virgin HDPE, sodium bentonite, and a non-woven polypropylene protective layer. The HDPE provides the first layer ...
HRM 714 is a hot-applied rubberized asphalt waterproofing membrane comprised of a blend of asphalts, synthetic rubber polymers, and filler to provide toughness, flexibility, and...
AIR-SHIELD LSR is a synthetic liquid moisture barrier. Eco-friendly, asphalt-free, and single component, it provides an air/vapor and liquid moisture barrier within the building...
Useful for both interior and exterior renovation and resurfacing projects, Spectrum Re-Kote TF can refresh degraded concrete surfaces, smooth rough areas, repair honeycombing,...
Perminator is an underslab vapor retarder/barrier with a perm rating 16 times lower and puncture resistance that is 45% tougher than required under ASTM E1745.Features easy installation...
PMCP is a semi-flexible vaporproofing and waterproofing membrane with a low permeability rating of 0.002 perms. Exceeds industry standards for puncture resistance and tensile ...
MEL-ROL pairs a 56-mil layer of polymeric membrane with a 4-mil cross-laminated polyethylene carrier film to create a versatile, sturdy waterproofing system.Overlap guidelines...
INTRAGUARD is a concrete sealing compound for exterior surfaces. It limits moisture intrusion to protect against scaling caused by deicing salts. A water-based blend of silane...
Smoothing out uneven, rough, or deteriorated interior concrete floors, Floor-Top STG is a standard traffic-grade, single-component, shrinkage-compensated, self-leveling floor ...
